Scag Power Equipment STHM - Manual (Page 27)

25
Ref. Part
No.
Number Description
1 04017-04 Capscrew, 1/4-20 x1/2 Serr. Fl. Hex Head
2 48462-02 Filter Head
3 48758 Filter, Spin-On Lube
4 48991 Hose Assembly
5 48688 Hose Assembly
6 48350-03 Elbow, 90 Degrees
7 04062-01 Hairpin Cotter
8 44088 Lever, Dump Valve
9 48353-02 Connector, Flare Swivel with Hose Barb
10 48136-04 Hose Clamp
11 48482 Hose, 1/4 Pushlock, Order by the inch
12 48482 Hose, 1/4 Pushlock, Order by the inch
13 48059-01 Hose Clamp
14 48935-01 Tee Union, Pushlock Hose
15 48482 Hose, 1/4 Pushlock, Order by the inch
16 48853 Hose, Dump Valve
17 48350-05 Elbow, 90 Deg.
18 48856 Inlet Hose, 3/4" ID
19 48937-01 Tee, 1/2" Run
20 48905 Motor Hose
21 48634 Hose, Pump To Oil Cooler
22 48936-01 Coupling, Flare Swivel
23 48936-02 Coupling, Flare Swivel With Barb
24 48572-06 Tube Union
25 48938-01 O-Ring Bushing
26 48603-02 O-Ring
27 48603-03 O-Ring
28 48603-04 O-Ring
29 48571-03 Cap
30 48810-02 Tee, JIC to O-Ring
31 48602 Hose, Order by the inch
32 48911-01 Compression Fitting
33 48350-12 Elbow, 90 Deg.
* Common hardware should be purchased locally. All bolts are grade 5 plated; all other fasteners are zinc plated.
LOWER HYDRAULICS