Sanyo PLC WM5500L - Manual (Page 33)


The input source changes each time you press the INPUT button on the side control or the remote control as follows:
Input 1→ Input 2→ Input 3 → ...
Before using the INPUT button on the side control or the remote control, you must select a correct input source by On-
Screen Menu and the latest input source will be displayed.
Input Selection
Press the INPUT 1, INPUT 2, or INPUT 3 button on the remote control. The input source appears on the screen as you
press each button. Select the connected input source.
INPUT 1 button
Input 1
RGB (PC analog)
RGB (Scart)
HDMI
INPUT  button
Input 
Video
y,Pb/Cb,Pr/Cr
RGB
INPUT  button
Input 
Video
y,Pb/Cb,Pr/Cr
S-video
Side Control Remote Control
INPUT button *
* Only the Input button function is set Mode 1 in the Setting menu, the INPUT button is used for switching input source.
(p.51)
INPUT button *
Direct Operation
Remote Control Operation
Side Control/Remote Control Operation
INPUT 1// buttons
Remote Control