Sierra Wireless EV-DO - Manual (Page 90)

Global Positioning System (GPS)
Rev 3.0B Feb.08 85
If you need to send reports to additional local ports, you can
specify other ports with *PPLATSEXTRA. Local Reports can be
sent to up to 7 additional ports consecutively following the S53
port. If S53=1000 and *PPLATSEXTRA=4, reports will be sent
to 1000, 1001, 1002, 1003, and 1004. In PPLATSEXTRA, specify
the number of ports where you want the reports sent, 0 to 7 (0
disables extra ports).
Figure 9-4: AceManager : PinPoint - *PPLATSEXTRA
TCP GPS Report Polling
The PinPoint‐E can easily and quickly be polled for location by
opening a TCP connection to port 9494 (default). Once the
connection is established, the PinPoint‐E will send a report
with the current position using the GPS report type the
modem is configured to use.
You can change the port for the TCP GPS poll using
*PPTCPPOLL.
Figure 9-5: AceManager : PinPoint - *PPTCPPOLL
Note: Some Internet providers (including cellular) block ports below
1024.
Report Types
There are several report types available. For remote reports, set
*PPGPSR. For local reports, set *PPLATSR.
Figure 9-6: AceManager : PinPoint - *PPGPRSR
• 0 ‐ *MF, Legacy reports for use with ATS version 4 and
older.