SpectraLink NetLink e340 - Manual (Page 52)

SpectraLink Corporation Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
72-1082-02-F.doc Page 52
Message Description Action
(battery icon),
Battery Low
beep (audio)
Low battery In call: the battery icon displays and a soft
beep will be heard when the user is on the
handset and the battery charge is low.
User has 15–30 minutes of battery life left.
The Battery Pack can be changed while the
call is still in progress. Do not press Power
Off/End Call. Place call on Hold or Park.
Quickly remove the discharged battery and
replace with a charged battery, power on
the handset, and press Power On/Start
Call to resume the call in progress.
Not in call: The battery icon displays
whenever the battery charge is low The
message Low Battery and a beep indicate
a critically low battery charge when user is
not on the handset. The handset will not
work until the Battery Pack is charged.
Battery Failure The Battery Pack is not functioning. Replace the Battery Pack with a new or
confirmed SpectraLink Battery Pack. Any
non-Spectra-Link Battery Packs will not
work.
Battery Failed Battery Pack is damaged or incompatible
with handset.
Replace the Battery Pack with a new or
confirmed SpectraLink Battery pack. Any
non-SpectraLink Battery Packs will not
work.
Cannot DNS CMgr A CallManager has been specified by name
when the handset has been configured for
static IP operation.
Change configuration file on CallManager
to use IP Address rather than names.
Can’t Renew DHCP The functional code is not able to get a lease
renewal.
Configuration problem. Check the IP
address configuration in the DHCP server.
Charging … The handset is charging in the Desktop
Charger
No action needed
Charge Complete The handset is now fully charged No action needed
Checking Code Handset is contacting the TFTP server to
determine if it has a newer version of
software that should be downloaded.
None, this message should only last for
approximately one second. If message
remains displayed, power off and contact
SpectraLink customer support.
Checking DHCP IP The handset is retrieving DHCP information
from the DHCP server
None. This is informational only.
CRC Code Error The software which has been TFTP
downloaded has a bad redundancy code
check
Try the download again, it is possible the
software was corrupted during download. If
the error repeats, check that the download
image on the TFTP server is not corrupted.
Code Mismatch! The software loaded into the handset is
incorrect for this model handset
Replace the software image on the TFTP
server with software that is correct for the
handset model.