SpectraLink NetLink e340 User Manual

Page 57

Advertising
background image

SpectraLink Corporation

Configuration and Administration—NetLink e340/i640 Wireless Telephone

Cisco CallManager and IP Phone 7960 Emulation

72-1082-02-F.doc

Page 57

Message Description

Action

System Locked

(with Busy Tone)

NetLink SVP Server is locked

Try call again later, system has been

locked for maintenance

TFTP ERROR(x):yy

A failure has occurred during a TFTP software

download. (x) is the file number which was

being downloaded; yy is an error code

describing the particular failure. Possible

error codes are:

01 = TFTP server did not find the requested

file.

02 = Access violation (reported from TFTP

server).

07 = TFTP server reported "No such user"

error.

16 = No TFTP server address

81 = File put into memory did not CRC.

FF = Timeout error. TFTP server did not

respond within a specified period of time.

Error code 01, 02, 07 or 16 – check the

TFTP server configuration.

Error code 81, the handset will attempt to

download the file again.

For other messages, power off the handset,

then turn it on again to retry the download.

If the error repeats, note it and contact

SpectraLink Technical Support.

Too Many Errors

The handset continues to reset and cannot

be recovered.

Fatal error. Return handset to SpectraLink.

Unknown

xx:yy:zz

A phrase is missing from your phintl file.

Download new software from the

SpectraLink site per

Software

Maintenance

.

Updating Code…

Handset is downloading new software into

memory.

None. When the progress bar fills the

display line the update operation is

complete on that file.

Updating …

The handset is internally updating its

software images

None. The handset may do this briefly after

a download. This is informational only.

Waiting…

Handset has attempted some operation

several times and failed

None. The handset is waiting for a

specified period of time before attempting

that operation again.

Wrong Code Type

Internal consistency check failure.

Assure that the license type is set to 9, and

that the slnk_cfg.cfg file indicates the

proper code is pd11ccc.bin.

Advertising
This manual is related to the following products: