Sharp MD-SR50H - Manual (Page 9)

9 8
Preparation
Inserting a MiniDisc
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc by pressing the middle
of the edge of the disc.
4
Close the compartment door.
2
1
3
4
Notes:
● Do not place the MiniDisc under the holder.
● If any resistance is felt, do not force the MiniDisc into the
unit, as it may cause damage to the unit. If resistance is
felt, remove the MiniDisc and reload it.
● To prevent recordings from being lost, the MiniDisc can-
not be removed until the TOC has been written (“TOC”
or “TOC EDIT ! ” is displayed ). Press the •
■ /:OFF
button to update the TOC and turn the power off, the
MiniDisc can now be removed.
Refer to the instructions on page 12.
Check that the erase-protection
tab is in the recordable position.