Getting started, Unpacking, Inserting batteries into the remote – Sony DAV-DZ700FW User Manual

Page 13: Unpacking inserting batteries into the remote

Advertising
background image

Ge
tting Star

te

d

13

GB

Check that you have the following items:

• Speakers (5)

• Subwoofer (1)

• Posts (long

×

4, short

×

4)

• Bases (4)

• Terminal covers (4)

• Screws (20)

• Surround amplifier (1)

• IR transmitter* (1)

• IR receiver* (1)

• IR receiver stand (1)

• Speaker base (1)

• AM loop antenna (aerial) (1)

• FM wire antenna (aerial) (1)

• Speaker cords (5 m

×

6)

(16.5 ft.

×

6)

• Remote Commander (remote) (1)

• Size AA (R6) batteries (2)

• Wall-mount pads

• Operating Instructions

• Speaker and TV connections (card) (1)

* The cords of the IR transmitter and IR receiver are

for this system only. You cannot use a commercially
available extension cord.

You can control the system using the supplied
remote. Insert two Size AA (R6) batteries by
matching the 3 and # ends on the batteries to
the markings inside the compartment. When
using the remote, point it at the remote sensor

on the system.

• Do not leave the remote in an extremely hot or humid

place.

• Do not use a new battery with an old one.

• Do not drop any foreign object into the remote casing,

particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from

the sun or lighting apparatus. Doing so may cause a
malfunction.

• If you do not intend to use the remote for an extended

period of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.

Getting Started

Unpacking

Inserting Batteries into
the Remote

Note

Advertising