Scag Power Equipment V-RIDE SVR52V-26FX - Manual (Page 31)

27
R
Section 6
Additional weight can be added to the front of the machine
if needed. See Figure 6-11.
Remove the front belt from the machine. 1.
Remove the mounting hardware securing the 2.
wieght(s) to the front of the machine.
Add the desired weight to the machine and secure 3.
using the recommended hardware. See Figure 6-11.
Reinstall the front belt cover. 4.
1 - WEIGHT FOR 48”/52”
2 - WEIGHTS FOR 36”
3 - OPTIONAL FOR ALL MODELS
1/2-13 ELASTIC
STOP NUT
1/2-13 x 2-3/4” (ONE WEIGHT)
1/2-13 x 4-1/2” (TWO WEIGHTS)
1/2-13 x 5-1/2” (THREE WEIGHTS)
Front Weight Adjustment Figure 6-11.
OPERATOR CUSHION ADJUSTMENT 6.9
The operator cushion can be mounted in twelve (12)
different positions to fit a wide range of operators. See
Figure 6-12.
Remove the hardware securing the operator cushion 1.
to the mounting bracket and set the cushion aside.
Remove the hardware securing the mounting 2.
bracket.
Install and secure the mounting bracket in the 3.
desired operating location. Locations A, B or C for
lower mounting positions or rotate the mounting
bracket 180 degree and install in G for higher
mounting positions. See Figure 6-12.
Install and secure the operator cushion in the 4.
desired location. Locations D, E or F for the lower
mounting positions or H, I or J for the higher
mounting positions. See Figure 6-12.