Sony ZS-M30 - Manual (Page 30)

30 GB
Labelling recordings
(Name Function)
Either during recording or after recording,
you can label the MDs and the tracks you
have recorded with letters, numbers and
symbols. You can input up to about 1 700
characters into each MD.
Labelling during recording
• You can label both MDs and tracks during
synchronized recording of a whole CD
(page 6) or the tracks you programmed
(page 20).
• You can only label the tracks during
synchronized recording of a single track –
REC IT (page 19).
During synchronized recording of
a whole CD or the tracks you
programmed
You can label an MD or a track with up to
40 characters. You can label up to 25 tracks.
If you want to label more than 25 tracks,
label the tracks after recording (page 32).
DEL
K , k
DISPLAY
4
Turn the jog dial to select the new track
position, and press YES•ENTER.
“003
ttt001?” appears in the
display.
If you want to cancel the move
function at this point:
Press NO•CANCEL or MD x.
5
Press YES•ENTER.
“Complete” appears in the display for a
few seconds after the track is moved.
Note
After you stop editing, do
not disconnect the mains
lead or move the player while “TOC EDIT”
is flashing in the display.
If you do so, editing
may not be done properly.
Moving recorded tracks (Move
Function) (continued)
EDIT
YES
ENTER
NO
CANCEL
MD x
Jog dial