Spalding 211948C - Manual (Page 12)

12
P/N 211948C 01/04
4. IMPORTANT! Center alignment
slot of lower pole section (3) in
a lower hole of middle pole
section (2) as in step 3. While
maintaining alignment, bounce
assembly and lower pole section
(3) together as shown until they
no longer moved toward taped
reference mark.
2
1
1
2
3
WOOD SCRAP
(NOT SUPPLIED)
IMPORTANT! Center alignment
slot of middle pole section (2)
in a lower hole of top pole
section (1) as shown. While
maintaining alignment, bounce
pole top (1) and middle section
(2) together as shown until they
no longer move toward taped
reference mark. Upright
assembly.
3.
WOOD SCRAP
(NOT SUPPLIED)
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM)
MINIMUM OVERLAP.
NOTE:
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM)
MINIMUM OVERLAP.
NOTE: