Spalding 211948C - Manual (Page 16)

16
P/N 211948C 01/04
13.
Carefully reposition entire assembly as shown.
Attach front of plastic handle (26) to back of plastic
handle (23) around handle bar (20) using self-
tapping screws (27) as shown.
IMPORTANT! Front of plastic handle (26) should
face outward, away from pole assembly.
Insert bolts (66) through plastic handle assembly,
handle bar (20), and attach nuts (14) as shown.
Tighten completely.
Install pole mount bracket (53) and reinforcement
bracket (63) with carriage bolts (54) as shown.
Tighten flange nuts (14) completely.
14.
FRONT SIDE
27
23
20 26
14
1
53
16.
54
63
20
14
66
15.