Getting started, Installing a battery hooking up the unit – Sony SA-46SE1 User Manual

Page 9

Advertising
background image

9

GB

Ge
tting star

te

d

Getting started

Slide and remove the battery compartment lid, and insert the two supplied R03 (size AAA)
batteries, E side first, matching the polarities shown below.

Notes

• Do not mix an old battery with a new one or mix different types of batteries.
• Do not leave the remote control in an extremely hot or humid place.
• Do not expose the remote control sensor to direct sunlight or lighting apparatuses. Doing so may cause a

malfunction.

• If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid

possible damage from battery leakage and corrosion.

• When the remote control no longer operates the unit, replace both batteries with new ones.
• Do not drop any foreign object into the remote control casing, particularly when replacing the batteries.

1

Remove the screw on the rear cover of the unit, then remove the rear
cover.

Installing a battery

Hooking up the unit

continued

Advertising
This manual is related to the following products: