Sony SA-46SE1 - Manual (Page 11)

11 GB
Ge
tting star
te
d
B DC IN 18V jack
Attach the AC power cord (mains lead) (supplied) to the AC adaptor (supplied). Then plug
the connector of the AC adaptor into the DC IN 18V jack on the rear of the unit.
After you have made all connections, connect the AC power cord (mains lead) into the AC
power outlet. If the supplied adaptor on the plug does not fit your wall outlet, detach it from
the plug (only for models equipped with an adaptor).
3
Guide the audio cord and the cable attached to the AC adaptor through
the notch at the side of the rear cover, then reattach the rear cover to
the unit and secure it with the screw removed in step 1.
Installing the unit on a flat surface
Be sure to attach the supplied foot pads to prevent vibration or movement as shown in the
illustration below.
Installing the unit
AC adaptor (supplied)
AC power cord
(mains lead)
(supplied)
To the AC
power outlet
Audio cord
Cable attached to the
AC adaptor
Bottom of the unit
continued