Spectra Logic TAC/COM SERIES - Manual (Page 81)

SM06 Rev. 4.10 Tac/Com Control Head Manual
The TOP ROW is for NORMAL OPERATION.
CHAN RADIO SQ
SELECT NEXT EDIT HELP
The BOTTOM ROW is for EDITING.
To show that they are related, engraved panel lines tie the EDITING functions together.
The alternate EDITING functions become active whenever the EDIT switch is in any
position other than OFF.
3.4.2.1
Display Switch
Display Switch
The DISPLAY switch works the same in both NORMAL and EDIT modes of operation.
The DISPLAY switch determines what data is shown on the individual channel
presentations for each radio. Either the alphanumeric channel name or identification (ID
position), or the actual channel frequency (RX and TX positions) can be displayed.
When editing, this also determines what will be edited. Whatever data is visible is the
material that can be edited. During normal operation, the crew can select whatever
presentation is the most helpful to them, which is generally the ID or channel name
display. The cursor, or left hand arrow, shows which radio is set up for channelling or
editing.
Jan 4, 2006 Page 3-7
ENG-FORM: 806-0106.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.