Spectra Logic TAC/COM SERIES - Manual (Page 87)

SM06 Rev. 4.10 Tac/Com Control Head Manual
Note that a STAR appears at the right side of the RT #2 ID label in the diagram below.
This means that the channel discrete line is enabled for that channel. This is a line to
control external switching of a special function. It is programmed just like a scan flag,
by advancing to that position with the NEXT button, and then toggling the entry with the
SELECT switch. There is only one channel discrete line to set, and it appears only for
the Flexcomm radios. This is a seldom-used function, and is provided for compatibility
reasons only.
3.5.1.3
EDIT Switch
EDIT
Switch
This locking, centre-off switch shifts the operation of the control head from editing back
to the normal operating mode. For normal radio operation, it must be returned to the
centre or OFF position. No special activity is needed to store the data that has been
entered while editing. It is stored as soon as it is entered. When editing is finished, set
the EDIT switch back to OFF.
3.5.1.4
HELP Switch
HELP
Switch
The help screen may be accessed at any time, and for any function, while in the edit
mode. Press the HELP button if the operation of any function is unclear during editing.
Information will be provided for the desired edit function, and if pressed while channel
editing in the tone character position, will bring up the complete tone look up table for
reference.
Jan 4, 2006 Page 3-13
ENG-FORM: 806-0106.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.