SMC Networks Barricade SMCWBR14-G - Manual (Page 52)

Configuring the Wireless Barricade g Router
40
• From IP Address
Input the last three digits of the first IP Address from the range of
IP addresses that you would like to exempt from this policy
enforcement.
Note: The default IP address of the Wireless Barricade is
192.168.2.1. The IP address that can be assigned to a
PC workstation on the network is 192.168.2.x (where x
means 2–254). See “Configuring Client TCP/IP” on
page 11.
• To IP Address
Input the last three digits of the last IP Address from the range of
IP addresses that you would like to exempt from this policy
enforcement.
Note: You also need to make sure that Exempt LAN Client
Option is set to Enable. Be sure to press the APPLY
button after completing the entry.