Sennheiser Digital Wireless System MX W1 - Manual (Page 10)

9
̈
Insert the earphones into the charging compartments
Ƹ
of
the docking station. Make sure that the earphones are
inserted correctly.
̈
Press the charging button
ƻ
to start charging.
The rechargeable batteries are being charged. The LEDs
»
and
ƺ
light up.
̈
Charge the rechargeable batteries until the LEDs go off.
Associating the earphones to the transmitter
(Pairing)
The MX W1 earphones and transmitter are already paired on
delivery. To enable wireless transmission, both the earphones
and the transmitter have to recognize each other:
1. Enrollment mode
After switch-on, a suitable device is searched.
2. Association mode
If a suitable device is detected, both devices will exchange
device identification information.
1s 0 2s
1s 0 2s