Sennheiser Digital Wireless System MX W1 - Manual (Page 15)

14
Using the MX W1
To switch the system on, proceed as follows:
1. Switch your audio device on.
2. Switch the earphones on (see following chapter).
3. Switch the transmitter on (see page 15).
4. Put the earphones on (see page 16).
You will hear the sound from your sound source.
Switching the earphones on/off
To switch the earphones off :
̈
Press and hold the operation/pairing button
¿
until the
LEDs
»
light up blue.
The earphones switch off.
To switch the earphones on :
̈
Remove the earphones from the docking
station
or:
̈
Press and hold the earphones’
operation/pairing button
¿
until the
LEDs
»
flash blue.
The earphones switch on.
¿
»
0 4s
4s 0
8