Sony SLV-469 - Manual (Page 15)

15 Getting Started
Getting Started
Hookup 4: VCR setup
1
Set the RF UNIT switch to
CH3 or CH4, whichever
channel is not used in your
area. If both are used, set
the switch to either channel.
For details, see page 45. If you made A/V connections (page 7), you can
skip this step.
2
Set the A/B switch to “A.”
3
Change the on-screen display language if desired. For details, see
page 18.
Cable box output channel
1 Press MENU and select LANGUAGE.
2 Select the language, and press OK.
6
Preset the cable box output channel (usually 2, 3 or 4). For details, see
page 21.
1 Press MENU and select TUNER PRESET.
2 Enter the cable box output channel.
3 Set MANUAL SET to ADD and press OK.
4
Press MENU and select TUNER PRESET. Set
ANTENNA/CABLE to CABLE. For details,
see page 19.
5
Preset the unscrambled channels into the
VCR. Select AUTO PRESET and press OK.
CH3
RF UNIT
CH4
LANGUAGE
ENGLISH
ESPAÑOL
TUNER PRESET CH1
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING ANT
ADD
ON
•
•
•
CABLE
ERASE
OFF
TUNER PRESET CH1
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING ANT
ADD
ON
•
•
•
CABLE
ERASE
OFF
PLEASE WAIT
TUNER PRESET CH3
ANTENNA / CABLE
AUTO PRESET
MANUAL SET
AFT
FINE TUNING ANT
ADD
ON
•
•
•
CABLE
ERASE
OFF