Sony SLV-469 - Manual (Page 46)

Additional Information
46
EAC-32 Antenna
connector (not
supplied)
Attaching the external
antenna connector
When using a 300-ohm twin lead cable
for a VHF/UHF antenna, use the EAC-
32 antenna connector (not supplied) to
connect the antenna to the VCR.
1
Loosen the screws on the antenna connector.
2
Wind the twin leads around the screws on the antenna connector.
3
Retighten the screws.
300-ohm twin
lead cable
EAC-66
UHF/VHF
band
separator/
mixer (not
supplied)
Attaching a UHF/VHF band
mixer
When using both a 75-ohm coaxial cable
and a 300-ohm twin lead cable for a
VHF/UHF antenna, use the EAC-66
UHF/VHF band separator/mixer (not
supplied) to connect the antenna to the
VCR.
1
Loosen the screws on the mixer.
2
Wind the twin leads around the screws on the mixer.
3
Retighten the screws.
4
Connect the 75-ohm coaxial cable to the mixer.
75-ohm coaxial
cable
300-ohm twin
lead cable
General setup information (continued)