Sony CMT-NEZ7DAB - Manual (Page 8)

8 GB
Plug type A
Plug type B
Plug type C
Note
To prevent noise pickup, keep the aerial away from the
system and other components.
Tip
You can use the same lead aerial for both DAB and FM
connection. Use the white side connector for DAB
connection and the brown side connector for FM
connection.
3 Connect the DAB aerial.
With a DAB external aerial, you can obtain
a higher DAB broadcast sound quality. We
recommend that you use the supplied DAB/
FM lead aerial only temporarily until you
install a DAB external aerial.
Connect the supplied DAB/FM lead aerial
to the DAB terminal on the back of this unit.
Connect a DAB external aerial (not
supplied) to the DAB terminal on the back
of this unit.
Tip
To install the DAB external aerial (not supplied), 75-
ohm coaxial cable with F male type connector (not
supplied) will be needed.
4 Connect the mains lead to a mains.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).
To turn on the system, press ?/1.
FM 75
CO
AXIAL
AM
Extend the FM lead
aerial horizontally
AM loop aerial
AM
FM 75
CO
AXIAL
Extend the FM lead
aerial horizontally
AM loop aerial
AM
FM 75
CO
AXIAL
AM loop aerial
Connect brown side Extend the FM lead
aerial horizontally
DAB 75
ANTENNA
Extend the DAB/FM lead aerial
(supplied) horizontally
Connect
white side
DAB 75
ANTENNA
75-ohm coaxial
cable with F male
type connector
(not supplied)
To DAB external aerial (not supplied)