Sanyo ICR-B50 - Manual (Page 10)

9
RECORDING
1. Press the n button to turn the power on.
2. Set the REC MODE switch (back of the unit) to select the desired
recording mode.
DIC (Dictating): “ ” appears.
CONF (Conference): “ ” appears.
LECT (Lecture): “ ” appears.
Note:
If an external microphone (not supplied) is connected, the recording
mode cannot be changed. “ ” appears.
3. Select the desired folder name, VAS and recording time modes. (See
“SELECTING THE MENU MODE”.)
4. Press the m button (red). Recording starts with
new file number.
Example: The display appears as shown below.
Folder name
Current file number Total file number
Elapsed recording time
5. Press the n button to stop the recording at any time.
Note:
•
The unit can record up to file number 99 for each folder (except ALARM
folder).
• When the recording time is full, “MEMORY FULL” appears briefly. In this
case, erase the unnecessary file.
Fig. 9
(Red)
Fig. 10