Troubleshooting (continued) – Sony ZS-2000 User Manual

Page 34

Advertising
background image

Additional Information

34

Symptom

The audio is weak or has poor
quality.

The audio is not stereo.

The picture of your TV becomes
unstable.

The timer does not operate.

The remote does not function.

The player uses a built-in micro computer for its various operations. Due to change in power
supply conditions, etc., operation may sometimes become unstable. After trying the above
remedies, if the player still does not function properly, unplug the AC power cord. While
keeping SNOOZE and CHARACTER pressed at the same time, plug the AC power cord again. If
the problem persists, please consult your nearest Sony dealer.

Remedy

• Move the player away from the TV.

• If you are using the remote while listening to

AM radio, noise may be heard. This is
unavoidable.

• Press PLAY MODE•MONO/ST on the player

until “STEREO” appears.

• If you are listening to an FM program near the

TV with an indoor antenna, move the player
away from the TV.

• Make sure the time on the clock is correct.

• Check to see if the AC power had been cut off.

• Make sure the (clock) indication is displayed.

• Replace all the batteries in the remote with new

ones if they are weak.

• Make sure that you are pointing the remote at

the remote sensor on the player.

• Remove any obstacles in the path of the remote

and the player.

• Make sure the remote sensor is not exposed to

strong light such as direct sunlight or
fluorescent lamp light.

• Move closer to the player when using the

remote.

Radio

Remote

Timer

Troubleshooting (continued)

Advertising