Smarthome 7307 - Manual (Page 3)

PACKAGE CONTENTS
Everything required for installation is included with this package
1 Control Panel (SC-001) includes:
1 antenna (installed)
1 AC adapter
1 9 volt alkaline battery
Two sets of Door/Window Sensors
(WT-433), each set includes:
1 transmitter
1 magnetic switch
1 magnet
2 spacers
1 12 volt alkaline battery (installed)
1 Motion Sensor (PS-433) includes:
1 9 volt alkaline battery (installed)
1 Keychain Transmitter (4B-434) includes:
1 12 volt alkaline battery (installed)
3 Packs of screws and anchors
(for Control Panel, Door/Window Sensors and Motion Sensor)
Sheet of templates
Double Sided Tape (to aid in the installation of the Control Panel, Door/
Window Sensors and Motion Sensor)
Warning Stickers 2 pcs
Manual
Warranty Card
Quick Guide
– 5 –
OVERVIEW
Congratulations!
You have just purchased one of the most reliable and up-to-date wireless
security systems on the market today. Skylink is the first company to in-
corporate the rolling code technology in a home/business security system.
This innovative technology provides increased security and trouble free
wireless connections which greatly reduces false alarms. It guarantees that
the Control Panel will only recognize radio waves from it’s remote sensors,
(door/window sensor, motion sensor and the keychain transmitter), which
prevents high tech thieves from duplicating signals and tampering with your
system.
This manual is divided into 6 categories.
1. Planning, Installation and Testing (pages 6-11)
- explains how to plan a security strategy.
- how to install the Control Panel and the remote devices, (door/window
sensor and the motion sensor).
- once everything is installed, explains how to test each device.
2. Lights and Sounds (page 12)
- explains the function of all the lights on the Control Panel.
- describes all the sounds emitted from the Control Panel.
3. Standard Programming and Passwords (pages 13-18)
- how to arm and disarm the system using the Control Panel.
- how to use the 4 button keychain transmitter to arm and disarm the Control
Panel.
- how to personalize your MPIN (Master Personal Identification Number).
- how to program a SPIN (Secondary Personal Identification Number).
4. Advanced Programming (pages 19-24)
- the Control Panel receives signals from the remote sensors in four different
zones. Explains how to program different remote sensors to different zones.
- the Control Panel is programmed with different alarm modes for different
situations. Explains how to program these alarm modes.
- explains the different alarm sequences preprogrammed at the factory for
your convenience.
5. Summary Table (page 25)
- summarizes all preprogrammed alarm sequences.
6. Maintenance (page 26-28)
- explains how to change batteries in all remote sensors and the Control
Panel.
– 4 –
SMARTHOME.COM™ 1-800-SMART-HOME 949-221-9200 http://www.smarthome.com Order #7307