Sherwood RV-4060R - Manual (Page 7)

REMOTE FUNCTION OVERVIEW
AMPLIFIER
1 1. POWER – for power control of this receiver or system.
(as described in amplifier chapter titled "POWER
STANDBY/ON).
1 2. SLEEP – for setting a time period after which the system
will automatically be switched to standby.
1 3. SYSTEM DISPLAY – for dimming displays of Sherwood
components connected by DIGI LINK II or III .
25. INPUT SELECTORS
33. MUTE – for muting the sound.
SURROUND CONTROLS
19. SURROUND MODE
PRO LOGIC, 3 STEREO, OFF – for selecting the
different surround modes.
20. CENTER MODE – for selecting the desired center mode
when in Dolby Pro Logic or Dolby 3 Stereo mode.
21. DELAY TIME – for adjusting the delay time of the rear
channel.
22. TEST TONE – for checking the output level of the front,
center and rear speakers.
23. CENTER LEVEL / – for adjusting the center level
(only in normal mode or wide mode).
24. REAR LEVEL / – for adjusting the rear level
(in Dolby Pro Logic mode)
32. MASTER VOLUME / – for adjusting the volume.
TUNER
1 4. 0-9 DIGITS – for selecting the preset stations.
26. FM MODE – for selecting the stereo or mono mode
when listening to FM.
27. PRESET SCAN – for scanning the stations memorized .
CASSETTE DECK
1 5. – for starting reverse or forward side play.
1 6. – for stopping recording/play.
1 7. – for winding the tape.
1 8. – for pausing recording/play.
1 9. DECK SELECTOR A, B – for selecting deck A or B.
10. – for recording.
In the DIGI LINK III remote control system, if pressing
PLAY, etc. on CD or Deck, CD or TAPE MONITOR is
selected automatically without selecting the input and PLAY,
etc. starts.
COMPACT DISC PLAYER
1 4. 0-9 DIGITS – for track selection, press required button
among 10 buttons on the remote control and for disc
selection, select disc No. (1~5) within 2 sec. after
pressing the DISC button.
11. DISC (CD changer only) – for disc selection.
12. – to begin play.
13. – to stop play/clearing a program.
14. – for skipping backward and forward.
15. – for pausing play.
16. REPEAT A< >B – for repeating a specific passage.
17. INTRO – to preview each track only for 10 seconds.
18. RANDOM – to play tracks randomly.
EQUALIZER
28. PRESET – for selecting equalizer pattern.
29. USER – for adjusting equalizer pattern as desired.
30. TAPE MON – for monitoring the sound of recording or
playback of cassette deck.
31. FILE – for selecting desired equalizer pattern in the
preset or user mode.
7
ENGLISH