Sharp FODC550 - Manual (Page 65)

USER SETTINGS
63
7
4
AUTO SHUT-OFF
TIME
1: 5 MIN.
2: 30 MIN.
3: 60 MIN.
4: 120 MIN.
5: 240 MIN.
• This function automatically
switches the machine to a state
that consumes even less power
than preheat mode if the set
duration of time elapses without
the machine being used when
the power is on. All lights
except the power save indicator
go off. To resume normal
operation, press the [START]
key (
). Normal operation
also resumes automatically
when a print/fax job is received
or scanning is begun from a
computer. While in auto power
shut-off mode, no keys (except
the [START] key (
)) can be
used.
5 STREAM FEEDING
1: ON
2: OFF
• When copying using the
RSPF, while "SET ORIGINALS
FOR STREAM FEEDING."
appears in the display after an
original has been scanned
(about 5 seconds), a
subsequent original can be
placed and automatically fed
into the machine.
6 LAYOUT IN 2IN1
1: PATTERN 1
2: PATTERN 2
• Use this setting to select the
layout pattern when two
original pages are copied onto
a single sheet of paper (see
page 31 for the layout
patterns).
7
OFFSET
FUNCTION 1: ON
2: OFF
• When enabled, this function
offsets the position of each
set of copies in the output tray
in copy mode, and each print
job in printer mode.
Program
number
Program name
Setting codes
(factory default
setting appears
in bold)
Explanation
FO-DC550_Copy(Sec).book 63 ページ ２００４年３月２５日 木曜日 午後３時４４分