Checking the total count – Sharp FODC550 User Manual
Page 90
TROUBLESHOOTING AND MAINTENANCE
88
5
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The drum
replacement required error indicator will go out and the ready
indicator will light up.
CHECKING THE TOTAL COUNT
You can check the total number of pages output by the machine (all pages printed by
the copy function and printer function), as well as the output counts of each function
(number of copies, number of scanned pages, number of faxes, etc.). When a count
reaches 999,999 it returns to 0.
1
Press the [MENU] key.
Press the [
] key (
) or [
] key (
)
until "TOTAL COUNT" appears, and then
press the [ENTER] key.
2
Press the [
] key (
) or [
] key (
) to
display the count of each function.
The count of each function changes as follows each the [
] key (
) or
[
] key (
)is pressed:
• "TOTAL OUTPUT":
Total number of pages output by the
machine
• "COPIES":
Total number of copies
• "SPF/RSPF":
Total number of pages scanned using the
RSPF
• "2-SIDED PRINT":
Total number of pages printed by two-sided
print
• "PRINTS":
Total number of pages printed the printer
function
• "FAX":
Total number of sent and received faxes
• "FAX SEND":
Total number of sent faxes
• "SCAN SEND":
Total number of scans
• "REMAINING DRUM LIFE": The remaining number of pages that can be
printed with the drum is displayed.
• "TONER REMAINING":
The approximate amount of toner remaining
in the TD cartridge is displayed as a
percentage.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order,
the covers may be damaged.
Note
MAIN MENU
3:TOTAL COUNT
TOTAL OUTPUT
012,345
FO-DC550_Copy(Sec).book 88 ページ ２００４年３月２５日 木曜日 午後３時４４分