SUPER MICRO Computer SUPERO X8SIA-F - Manual (Page 41)

Chapter 2: Installation
2-15
SP1 +
+
B1
JB T1
IPMB
JD1
JPW1
JPW2 JPI2C
JWOL
JWF1
JF1
FAN2
FAN1
FAN5
FAN3
FAN4
T-SGPIO1
T-SGPIO2 JI2C1
JI2C2
JWOR
JL1
3
JPUSB1
JLED
JPL1
JPL2
JPG1
LE1
C
C LE7
J*
W83627DHG
IDT 89HI0524G2PS
PCH
Her
mon
SLOT7 PCI-E 2.0 (2.5GT/s) X1
SLOT6 PCI-E 2.0
SLOT5 PCI-E 2.0 X8
SLOT4 PCI-E 2.0 X8
SLOT3 PCI-E 2.0 (2.5GT/s) X1
USB8/9
FAN2/CPUF
AN
USB4
USB5
FAIL PWR
DOM PWR
JWOL:
I-SATA4 I-SATA3
UID
DIMM2A
DIMM2B
DIMM2C
DIMM1B
DIMM1A
Chassis I
ntrusion
Wake on Lan
Wake on Ring
CMOS CLEAR
1-2:ENABLE 2-3:DISABLE JPL2:LAN2 JPL1:LAN1
2-3:DISABLE 1-2:ENABLE
JPB:BMC
JPI2C:PWR I2C
JSPK
:Buzz
er/Speaker
COM2
FLOPPY
DDR3 1066/1333 UDIMM/RDIMM required
JL1:
LAN1/LAN2
JPUSB1:B/P USB WAKE UP 1-2:ENABLE 2-3:DISABLE
JI2C1/JI2C2
USB6/7
2-3:Disable 1-2:Enable
CPU
JLED:P
ow er LED
OFF:Disable ON:Enable
2-3:DISABLE 1-2:ENABLE
JF1 ON
LED
LED PWR
HDD
NIC1
NIC2
OH/FF
RST
PWR
I-SATA2 I-SATA1
I-SATA0
I-SATA5
SLOT2 PCI-E 2.0 (2.5GT/s) X4 (IN X8 SLOT)
SLOT1 PCI 33MHz
DIMM1C
JPG1: VGA
KB/MOUSE
VGA
COM1
IPMI_LAN
USB0/1 USB2/3
X8SIA
2-4 Motherboard Installation
All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.
Tools Needed
Philips Screwdriver Pan head screws (9 pieces)
Location of Mounting Holes
There are nine (9) mounting holes on this motherboard indicated by the arrows.
Stand Offs (9 pieces)
(Only if needed)
Caution: 1) To avoid damaging the motherboard and its components, please
do not use a force greater than 8 lb/inch on each mounting screw during
motherboard installation. 2) Some components are very close to the mount-
ing holes. Please take precautionary measures to prevent damage to these
components when installing the motherboard to the chassis.