Lubrication and fluid level check (m1), General information – Sterling Trucks Acterra MX User Manual
Page 28
Maintenance Operation 00–15 (see
), sum-
marizes all Lubrication and Fluid Level Check opera-
tions that must be performed at the M1 Maintenance
Interval for Schedules I, II, and III
Maintenance operation numbers given in the table
are reference numbers used to help you find detailed
instructions in the manual on the lubrication or fluid
check.
Maintenance Operation 00–15
M1 Lubrication and Fluid Level Check
Maint.
Oper. No.
Operation Description
Clutch Release Bearing and Release Cross-Shaft Lubricating
Hydraulic Fluid Level Checking
Manual Transmission Fluid Level Checking
Fifth Wheel Lubricating
31–04
Trailer Electrical Connector Lubricating
Suspension Lubricating
Knuckle Pin Lubricating
Tie-Rod End Lubricating
All-Wheel-Drive Front Axle Oil Level Checking
Axle Lubricant Level Checking
Driveline Lubricating
Foot Brake Valve Actuator Lubricating, Bendix E–8P
Automatic Slack Adjuster Lubricating, Meritor
Automatic Slack Adjuster Lubricating, Gunite
Automatic Slack Adjuster Lubricating, Haldex
Drag Link Lubricating
Power Steering Reservoir Fluid Level Checking
Power Steering Gear Lubricating
Weatherstrip, Door Latch, and Door Hinge Lubricating
Table 10, Maintenance Operation 00-15, M1 Lubrication and Fluid Level Check
General Information
00
Lubrication and Fluid Level Check (M1): 00–15
Acterra Maintenance Manual, October 2008
00/21