Samsung SHR-1040K - Manual (Page 12)

1-6 English
1. RECORD
Starts the recording as the setup
record setting in normal record
mode.
2. ID RESET
The ID is reset.
3. NUMBER KEY
Press to select one of single
channels in Live mode. Use this
for typing purposes in a numeric
input mode.
4. MODE
Selects split-screen .
5. FREEZE
Runs the FREEZE function in live
mode.
6. ZOOM
Press to enlarge the single chan-
nel picture to its double.
7. (STOP)
Ends search during playback and
recording.
8.
FR (fast reverse) : used for quick
backwardsearch while in play.
9. MENU
Either goes to the system menu
screen or moves to the upper
menu from the lower menu.
10. (ENTER)
Shows the cursor for the
channel selection in live mode or
used as the select button for
menu setup.
11. REC LOCK
You can check if REC LOCK is set to
ON/OFF.
12 . MONITOR OUT
You can check which mode is set for
the current monitor output.
13. CH 1
Displays SINGLE CH 1.
14. CH 2
Displays SINGLE CH 2.
15. SYSTEM ID
Confirms system and remote
control ID and changes the
remote control ID.
16. PIP
In Single mode, press to watch
another channel in a sub picture.
17. SEQUNCE
The single channel mode switch-
es according to the specified time
on the menu.
18. ALARM
Cancels the alarm while the
alarm is going off.
19. II
Play/Pause : pauses and
resumes the search screen
while in play.
20 .
FF (fast forward) : used for
quick forward search while in
play.
21. SEARCH
Searches for data on the HDD.
22.
Used for changing settings
or for moving the cur-sor
up/down/left/right in live
mode and on the menu and
search screens.
23. PWD LOCK
You can check if the password lock
(PWD LOCK) is set to ON/OFF.
24. SYS INFO.
You can check out information on the
system version.
25. CH 3
Displays SINGLE CH 3.
26. CH 4
Displays SINGLE CH 4.
4
Remote Controller
➛
To change the remote control ID
While pressing the SYS ID key, enter the numeric ID in two digits (Default ID: 00).
ex) If you want to change the remote control ID to “08”: While pressing the SYS ID key, enter 0 and 8 and press it again to check if the ID is
changed to 08.
SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 1-6