Sony BDVE580 - Manual (Page 25)

25 US
Ge
tting Star
te
d
When the component does not have an HDMI OUT jack
Connect the system so that video signals from the system and other component are sent to the TV, and
audio signals from the component are sent to the system as follows.
If the component plays sound only, connect the audio output of the component to the system.
Depending on the jacks on the component, select the connection method.
• Component which has a digital coaxial output jack: A
• Component which does not have a digital coaxial output jack: B
• If you make connection above, set [Control for HDMI] in [HDMI Settings] of [System Settings] to [Off] (page 61).
• You can enjoy component sound by selecting the “SAT/CABLE” function for connection A, or the “AUDIO”
function for connection B (page 30).
System
Signal flow
TV
: Audio signal
: Video signal
Component
Video out
Audio out
DIGITAL OUT
COAXIAL
AUDIO OUT
L R
AUDIO IN
L
R
AUDIO
SAT/
CABLE COAXIAL
DIGITAL IN
To the digital coaxial out jack
of the VCR or digital satellite
receiver, etc. To the audio out jacks of the VCR, digital
satellite receiver, PlayStation, or
portable audio source, etc.
B Audio cord
(not supplied)
A Digital coaxial cord
(not supplied)
Rear panel of the unit
White Red
Red White
: Signal flow