Using the sleep timer – Sony BDVE580 User Manual

Page 50

Advertising
background image

50

US

• You can change measurement units (feet or meters)

by pressing the color button (RED).

x [Level]

You can adjust the sound level of the speakers.
You can set the parameters from –6.0 dB to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.

[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Center]* 0.0 dB: Set the center speaker level.
[Surround Left/Right]

*

0.0 dB: Set the surround

speaker level.
[Subwoofer] 0.0 dB: Set the subwoofer level.

* This item appears when you set it to [Yes] in the

[Connection] setting.

x [Test Tone]

The speakers will emit a test tone to adjust
[Level].

[Off]: The test tone is not emitted from the
speakers.
[On]: The test tone is emitted from each speaker
in sequence while adjusting level. When you
select one of the [Speaker Settings] items, the
test tone is emitted from each speaker in
sequence.
Adjust the sound level as follows.

1

Set [Test Tone] to [On].

2

Press

X/x to select [Level], then press

.

3

Press

X/x to select the desired speaker

type, then press

.

4

Press

C/c to select the left or right

speaker, then press

X/x to adjust the

level.

5

Press .

6

Repeat Steps 3 to 5.

7

Press RETURN.

The system returns to the previous display.

8

Press

X/x to select [Test Tone], then

press .

9

Press

X/x to select [Off], then press

.

• The test tone signals are not output from the HDMI

(OUT) jack.

• To adjust the volume of all the speakers at one time,

press VOL +/–.

Using the Sleep Timer

You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
The time can be preset in intervals of 10
minutes.

Press SLEEP.

Each time you press SLEEP, the minutes display
(the remaining time) in the front panel display
changes by 10 minutes.

When you set the sleep timer, the remaining
time appears every 5 minutes.
When the remaining time is less than 2 minutes,
“SLEEP” flashes in the front panel display.

To check the remaining time

Press SLEEP once.

To change the remaining time

Press SLEEP repeatedly to select the desired
time.

Advertising
This manual is related to the following products: