SanDisk Sansa e100 Series - Manual (Page 18)

Figure 4: The FM Radio LCD screen
The control buttons and ports for your player are described in The Basic Controls section on
Page 3. More detailed descriptions on how the controls work is included in the step-by-step
instructions throughout this document. In addition, the Navigating the Software Menus
chapter on Page 21 describes the onscreen menus that appear when you use these controls.
Finding a Radio Station
Once the FM Radio screen appears, you can listen to your FM radio and change settings.
Follow these steps:
1. Put your player in FM Radio mode. See Using the FM Radio Controls on Page 16
if you need help with this step.
2. To change stations, press the Next/Fast Forward Button or Previous/Fast Reverse
Button to move along the radio spectrum. Press and hold either of these buttons to
scan radio stations.
NOTE: You can scan preset stations using the Play/Pause/Up Button or the
Repeat/AB/Down Button. See Accessing Preset Channels on Page 18 to learn how to
access the Preset Channel software menus to add, modify, and delete preset channels.
3. To change the volume of your music as it plays, press and scroll the Rotary Wheel
in the top right corner of your player.
4. To stop playing the FM radio, you have two choices:
Press and hold down the Power/Menu Button until all the dark squares
disappear under the “Powering Down” message.
Press the Power/Menu Button briefly to navigate the software Menu to switch to
Music mode. To learn how onscreen menus work, see the Navigating the
Software Menus chapter that begins on Page 21.
Listening to the FM Radio ` 17