SanDisk Sansa e100 Series - Manual (Page 3)

What You Need to Begin
To add music to the Sansa e100 MP3 Player, the following are needed:
Intel Pentium PC or equivalent.
Windows 2000 or Windows XP (Windows Media Player 9 or 10).
CD-ROM drive
USB 2.0 port required for High-Speed transfer.
Supports MP3, WMA, secure WMA and Audible audio file formats
Your Sansa Package contains:
Sansa e100 Series MP3 Player
Earphones
Armband
AAA battery
USB 2.0 travel cable
CD with valuable software and User Manual
Quick Start Guide
Installing the Battery
Follow the steps as shown in Figure 1:
1. Turn your player over, so the backside faces up, and locate the battery door at the
bottom of the player.
2. Gently depress and pull the battery cover out towards the outside edge of your
player.
3. Lift off the battery cover.
4. Push the battery down into the battery area of the player, placing the smooth
bottom (--) of the battery against the spring in the battery area. The protruded top
(+) of the battery slips down and under. The battery should fit snugly.
5. Replace the battery cover until it snaps closed.
Quick Start ` 2