Sprint Nextel 550 - Manual (Page 88)

Section 3: Using the PCS Connection Card
82 3D: Menu Options
Service Alert This field allows you to enable and disable the
Service Alert feature.
When enabled, the card emits a tone whenever a
change occurs in the PCS Vision coverage or
roaming status.
A tone is emitted whenever the card:
ᮣ
Goes from being out of PCS Vision
coverage to being in PCS Vision coverage
ᮣ
Goes from being in PCS Vision coverage to
being out of PCS Vision coverage
ᮣ
Leaves the Sprint Nationwide PCS Network
ᮣ
Enters the Sprint Nationwide PCS Network
Use the check box to enable and disable the feature.
(The feature is enabled when checked.)
Change … Depending on your PCS Service Plan, you may have
a Voicemail feature that allows callers to leave you a
message when you don’t answer a call. If you have
this feature, then you access your voice messages by
dialing your PCS Phone Number.
When the PCS Connection Card is configured, your
voicemail dial-in number is automatically set up for
you. If this number should change, you can change
the number here. To change the number:
1. Click Change…
2. Enter the new phone number in the
window that appears.
3. Click OK .
Table 9: Voice Tab Options (Continued)
Field Description