Sharp IM-MT899H - Manual (Page 47)

02/2/21 IMMT899H_Hard_E_5.fm
E-38
IM-MT899H
ENGLISH
Ad
v
a
nced Features
-T
it
li
ng
a
Mi
niDisc
-
Master MiniDisc operation Operation of the MiniDisc for stamping
Note:
If this happens, adjust the total number of tracks on the newly
recorded MiniDisc using the edit operation.
1
Insert a master MiniDisc.
Do not mistake the master MiniDisc for the target one.
2
Whilst in the stop mode, press the M button.
The unit enters the menu select mode.
3
Move the M button toward
or
to select "E(EDIT)" and
press it.
4
Move the M button toward
or
to select "N(NAME
STAMP)" and press it.
5
Press the M button.
6
When the unit displays
"CHANGE MD", remove the
master MiniDisc.
Remove it without turning off the power. Or, the opera-
tion will be cancelled.
7
Load a MiniDisc for stamping.
8
Press the M button.
The unit will finish recording the
character information and enter
the stop mode.
If the total number of tracks on the
master MiniDisc does not match
that on the MiniDisc for stamping,
the unit will display "Can'tE" and
turn off the power.