Samsung Color Dual Quad Network Observation System SSC21WEB - Manual (Page 25)

Eng-25
Chapter 3: Setting each item function at SETUP
MENU
Pressing the MENU BUTTON of the FRONT PANEL allows users to enter SETUP MENU and see the
following menu OSD box. Setting method of each SETUP MENU function and operation is as follows.
3-1) ADJUST MENU function and setting method
• Function: Allows adjustment to the display status
• Setting method: Move to #1. ADJUST MENU by using œ œENTER√ √ SWITCH and press the
ENTER SWITCH to display the OSD as shown in the figure below. (The figure shows the initial
setting status.)
Move to a target item by turning œ œENTER√ √ SWITCH left or right.
Enter the item by pressing the œ œENTER√ √ SWITCH.
At this time, set a target value by turning œ œENTER√ √ SWITCH left or right
You can move to another item by pressing again the SWITCH after setting the target value.
(1) CONTRAST : Adjusts light and shade of screen
(2) BRIGHT : Adjusts lightness of entire screen
(3) COLOR : Adjusts color density
(4) TINT : Adjusts color sense
(5) SHARPNESS : Adjusts contour of screen
06/01/03 13:14:00
1. ADJUST
2. DATE/TIME
3. DWELL TIME
4. DISPLAY
5. TITLE
6. ALARM
7. NETWORK SETUP
8. VIEW EVENT LOG
06/01/03 13:14:00
CONTRAST 50
BRIGHT 50
COLOR 50
SHARPNESS 50
TINT 50
SETUP MENU
ADJUST SETTING
SSC21WEB-1 2004.8.25 5:38 PM Page 25