SUUNTO T6D - Manual (Page 24)

● OFF : The light cannot be switched on by pressing a button or during alarm.
● NIGHT USE : The light is switched on when you press any button and stays on for
a short while after the last press of a button and when an alarm sounds. NIGHT
USE significantly reduces battery lifetime.
To set the backlight:
1. In the settings menu, enter GENERAL .
2. Scroll to LIGHT with [Lap +] and [Light -] and enter with [Mode].
3. Scroll through the settings with [Lap +] and [Light -] and accept the setting with
[Mode].
4. Press [Start Stop] to exit.
NOTE: Heavy use of the backlight significantly reduces battery life. To save power,
backlight blinks when used in TRAINING mode and is inactive when searching for HR or PODs.
4.4 Configuring TRAINING mode displays
In TRAINING mode, you can browse and record various data during your training sessions.
Both displays have three configurable rows. Select which functions and parameters
you want to be shown in each row of the displays.
Description Content
Altitude from sea level according to selected units in UNITS settings altitude
23
en