How to set the oven for self-cleaning, How to delay the start of self-cleaning, How to turn off the self-cleaning feature – Samsung DG68-00295A User Manual

Page 47: After a self-cleaning cycle

Advertising
background image

Maintaining your appliance _

47

05

MAINT

AINING YOUR APPLIANCE

How to set the oven for self-cleaning

1. Select the length of time for the self-cleaning operation, eg. 3

hours.

Press the

SELF CLEAN pad once for a 3 hour clean time, twice

for a 4 hour clean time, or 3 times for a 2 hour clean time.

The default setting is 3 hours.

2. Start the self-cleaning cycle.

Press the

SET/START pad. The motor-driven door lock will

engage automatically.

You will not be able to start a self-cleaning cycle if the control lockout feature is activated

•

or if the oven’s temperature is too hot.

The oven door locks automatically. The display will show the clean time remaining. It

•

is not be possible to open the oven door until the temperature drops to a safe/cool
temperature.

The self-cleaning feature will not operate when a surface element is on. If a surface

•

element gets turned on during a self-cleaning cycle, the cycle will turn off automatically.

How to delay the start of self-cleaning

1. Press the SELF CLEAN pad.

Select the desired self-clean time by pressing the

SELF CLEAN pad.

2. Press the DELAy START pad.

3. Using the CLOCK AM/PM and number pads, enter the time you want the clean cycle to start.

4. Press the SET/START pad.

The display will show

Delay, Self clean and Lock icon. The motor-driven door lock will

engage automatically.

5. Self-Cleaning cycle will turn on automatically at the set time.

How to turn off the self-cleaning feature

You may find it necessary to stop or interrupt a self-cleaning cycledue to smoke in the oven.
(When the self-cleaning cycle is done, End will show in the display and a beep will sound 6 times.)

1. Press the CLEAR/OFF pad.

2. You will be able to open the oven door once the oven has cooled down for approximately 1

hour.

After a self-cleaning cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.

•

(If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with
a vinegar and water mixture.)

If the oven is not clean after one cycle, repeat the cycle.

•

You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

•

FE-R500_XAC DG68-00295A.indb 47

2010-02-18 �� 11:33:27

Advertising
This manual is related to the following products: