Sony KV-14LM1U - Manual (Page 7)

7
GB
Connecting an Indoor Aerial
Connecting an Outdoor Aerial and VCR
Installation
Connecting cables are not supplied
For a better reception we recommend you connect an external
aerial. However, where an external aerial is not available and
your local UHF signal is strong you can connect the supplied
loop aerial as follows:
1 Insert the loop aerial into the opening on top of the set until
it clicks.
2 Connect the aerial connector to the aerial socket on the rear
of the set.
3 After turning on the TV, adjust the aerial for optimum
reception.
For more details of VCR connection, please refer
to the section “Connecting Optional
Equipment” of this instruction manual.
or
VCR
Scart lead is optional.
OUT IN
03KV14LM1UGB.fm Page 7 Thursday, May 24, 2001 3:29 PM