Sony ECM-3711 - Manual (Page 62)

ECM-3711 Series
62 ECM-3711 Series User’s Manual
3.5.3.2 AGP & P2P Bridge Control
This item stores the onboard AGP and P2P function information. The reference table is as
below.
Item Options Description
AGP Aperture Size
32M,
64M,
128M,
256M,
512M,
1G
Select the size of Accelerated Graphics Port
(AGP) aperture. The aperture is a portion of the
PCI memory address range dedicated for
graphics memory address space. Host cycles
that hit the aperture range are forwarded to the
AGP without any translation.
AGP 2.0 Mode 4X, 2X, 1X
This item allows you to select the AGP 2.0 mode
to 4X,2X or 1X.
AGP Driving Control
Auto
Manual
This item allows you to select the AGP Driving
Control to auto / disable Mode.
AGP Driving Value 00 ~ FF
This item allows you to set the AGP Driving
value
AGP Fast Write
Enabled
Disabled
This feature controls the AGP bus’s Fast Write
capability. It accelerates memory write
transactions from the chipset to the AGP device.
AGP Master 1 WS Write
Enabled
Disabled
Enabled this item to increase AGP writing
AGP Master 1 WS Read
Enabled
Disabled
Enabled this item to increase AGP reading
AGP 3.0 Calibration Cycle
Enabled
Disabled
This option allows you to disable the AGP 3.0
calibration cycle. This cycle ensures that the
on-die termination impedance signal swing and
slew rate of the AGP signals are calibrated on a
periodic basis to ensure signal integrity.
It is recommended to keep this setting enabled.
VGA Share Memory Size
Disabled
2M, 4M, 8M
16M, 32M, 64M
Select the size of onboard video controller’s
frame buffer. The buffer size shares from system
memory unit.
Direct Frame Buffer
Enabled
Disabled
This item allows you to select the Direct Frame
Buffer to enabled / disabled.
Select Display Device
AUTO, CRT, LCD,
TV, DVI, HDTV,
CRT+LCD, CRT+TV
CRT+DVI, CRT+HDTV
DVI+HTDV, LCD+DVI
TV+DVI
This item allows you to select display device.
Panel Type
640x480 1x18B
800x600 1x18B
1024x768 1x18B
1280x768 1x18B
1280x1024 2x18B
1400x1050 2x18B
1600x1200 2x18B
1280x800 1x18B
800x480 1x18B
1024x768 2x18B
1024x768 1x24B
1024x768 2x24B
1280x768 1x24B
1280x1024 2x24B
1400x1050 2x24B
1600x1200 2x24B
This item allows you to select the panel type.
Outport Port DI0, DI1 This item allows you to select the outport port.
Dithering Enabled, Disabled This item allows you to enable dithering.