Siemens SX56 - Manual (Page 30)

18
To restore memory from your device’s Flash ROM:
1. Tap , Settings, System and then Permanent Save.
2. To restore Contacts or Calendar tap the PIM tab, and then check one or
both of the boxes.
3. To restore Inbox and Internet settings tap the Connections tab and then
Restore from Flash.
3.3 Calibrating Your Screen
When you first startup your SX56, you will be asked to calibrate the screen by tapping the center of a cross with your stylus as it
moves around the screen. This process ensures when you tap the screen with your stylus the item tapped is activated.
If, however, when you are using your SX56, you discover tapping an item doesn’t bring up the appropriate response, it means
your device has lost calibration. You can recalibrate your screen by following the picture instructions below.
To recalibrate your screen:
1. Tap Settings, System and then Screen.
2. As described above, tap the center of the cross to with your stylus
as it moves around the screen.
3.4 Understanding the Today Screen
The Today screen appears when you turn on your device for the first time each day. It also appears when you turn on your device