Sony ZS-X3CP - Manual (Page 18)

18 GB
1
Connecting the AC power adaptor
Insert one end of the supplied AC
power adaptor to the DC IN 9V socket
located on the side of the player, and the
other end to the wall outlet.
Note
Use only the supplied AC power adaptor. Do not
use any other AC power adaptor.
Setting Up
Choosing the power sources
You can use the AC power or batteries as a power source.
Changing the MW tuning interval
If you need to change the MW tuning
interval, do the following:
1 Press BAND•AUTO PRESET until
“MW” is displayed.
2 Press ENTER for 2 seconds.
3 Press BAND•AUTO PRESET for 2
seconds.
“MW9” or “MW10” flashes.
4 Push the jog lever toward PRESET j or
PRESET J to select “MW9” for 9 kHz
interval or “MW10” for 10 kHz interval.
5 Press ENTER.
After changing the tuning interval, you need
to reset your preset MW radio stations.
2
Battery compartment
1
DC IN 9V
To a wall outlet
DC IN 9V
Polarity of the plug