Sony FD Trinitron KV-28FQ70U - Manual (Page 2)

Language
English
Norge
Français
Italiano
Nederlands
Select Language: Confirm: OK
If no channels were found
during the auto tuning process
then a new menu appears
automatically on the screen
asking you to connect the aerial.
Please connect the aerial (see
step 3) and press
OK . The auto
tuning process will start again.
When the automatic tuning is finished,
the Programme Sorting menu appears on
the screen.
8 Changing the Programme Order
of the broadcast channels
By following the instrutions below, you can rearrange the
order in which broadcast channels appear on the screen.
7 5 Automatically Tuning
the TV
You need to tune the TV to receive channels.
By following the instructions below, this TV automatically
searches and stores all available broadcast channels for you.
Your television stations are now stored in your television’s memory.
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
Select: Confirm: OK
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
Select: Confirm: OK
Do you want to start
automatic tuning?
Yes
No
Programme:
Channel:
Searching...
1
C 01
Auto Tuning
No channel found
Please connect aerial
Confirm
Programme Sorting
Programme:
01 TVE2
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select Channel: Confirm:
Press the OK button on the remote
control to select Yes .
The TV starts to automatically search
and store all available broadcast
channels for you.
This procedure could take some
minutes.
Please be patient and do not press
any buttons while the automatic
tuning is in progress. Otherwise
automatic tuning will not be
completed.
In some countries the TV
Broadcaster installs the channels
automatically (ACI system). In
this case, the TV Broadcaster
sends a menu in which you can
select your city by pressing
the
or button and OK to
store the channels.
Programme Sorting
Programme:
01 TVE2
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select Channel: Confirm:
Programme Sorting
Programme:
01 TVE2 41 TVE
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select new position Move: OK
a) If you wish to keep the broadcast channels in
the tuned order:
• Press the MENU button on the
remote control to exit and
return to the normal TV screen.
Your TV is now ready for use.
b) If you wish to store the broadcast channels in
a different order:
• Press the or button on the
remote control to select the
programme number with the
broadcast channel you wish to
rearrange, then press the
button.
• Press the or button on the
remote control to select the new
programme number position for
your selected broadcast channel,
then press the
OK button.
• Repeat all the above steps if you
wish to change the order of the
other broadcast channels on your
TV.
• Press the MENU button on the
remote control to exit and return
to the normal TV screen.
Your TV is now ready for use.
Selecting the language
of the menu screens
This TV set works with menu screens. By following the
instructions below, you can select the desired language of
the menu screens.
a) If it is not necessary, press OK to
select Not necessary .
b) If it is necessary, press or to
select Adjust now , then press
OK and correct any slant of the
picture between –5 and +5 by
pressing or . Finally press
OK to store.
The automatic tuning menu appears on the
TV screen.
Programme Sorting
Programme:
01 TVE2
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select Channel: Confirm:
6 Correcting the Picture
Slant
Because of the earth’s magnetism, the picture might slant.
By following the instructions below, you can correct the
picture slant if it is necessary.
If picture slants, please
adjust picture rotation
Not necessary
Adjust now
Select: Confirm: OK
Language
English
Norge
Français
Italiano
Nederlands
Select Language: Confirm: OK
The first time that you switch on your
TV, the
Language menu appears
automatically.
Press the or button on the
remote control to select the language,
then press the
OK button on the remote
control to confirm your selection.
The Picture Rotation menu appears on the
screen.