Save these instructions, Special instructions – Sunbeam 3020 User Manual
Page 3
If the iron is not operating normally, disconnect
from
the power supply and have the iron
serviced by an authorized
center.
l
Your
iron is
to rest on
the heel rest.
Do
not leave the iron unattended.
Do
not set the iron on an unprotected surface,
even if it is on
its
heel rest.
SPECIAL INSTRUCTIONS
l
This is a
appliance. To avoid a
circuit overload,
do
not operate another high
wattage appliance on the same circuit.
.
If an extension cord is absolutely necessary, a
IO-ampere cord should be used.
Cords rated
for less amperage may overheat. Care should be
taken to arrange the cord so that it cannot be
pulled or tripped
For products purchased in the United States
and Canada only
To
reduce
the risk of electrical shock, this appliance
has a polarized plug (one
is wider than the
other).
This plug fits a polarized outlet only one
way; if
the
plug does not fit fully into the outlet,
reverse the plug. If it still does nor fit, contact a
qualified electrician.
Do
not attempt to defeat this
safety feature.
SAVE THESE
INSTRUCTIONS