FARBERWARE HAND MIXER FSHM100 - Manual (Page 5)

BEFORE USING YOUR
10 - SPEED HAND MIXER
Carefully unpack Hand Mixer. Wash Beaters and Dough Hooks in
warm, soapy water. Rinse well and dry thoroughly. Wipe Mixer
with a soft, clean cloth or sponge. Never immerse your Hand Mixer
in water or any other liquid.
ATTACHING BEATERS/DOUGH HOOKS
Before handling the Beaters/Dough Hooks, check to be sure the
Mixer is unplugged from the electrical outlet and the Speed Control
Lever is in the OFF position.
NOTE: One Dough Hook has a white plastic Collar on its Stem.
You must insert this Dough Hook into the larger,
rectangular hole in the Mixer.
1. Select either the Beaters or the Dough Hooks.
Push the attachment Stem into the Mixer
hole. Rotate until it locks into position.
2. Push Dough Hook with
plastic Collar into the larger,
rectangular hole.
3. After installing the Beaters or
Dough Hooks, gently pull on
each Stem to be sure they are
secured properly.
CAUTION: Always unplug Mixer from outlet before installing or
removing Attachments.
CAUTION: Use either both Beaters or both Dough Hooks.
Do not attempt to use a Dough Hook with a Beater.
This could damage the Mixer.
REMOVING BEATERS
Slide Speed Control Lever to the OFF position. Unplug appliance.
Push down on the Beater Eject Button to eject Beaters.
4