FARBERWARE HAND MIXER FSHM100 - Manual (Page 6)

INSTRUCTIONS FOR USE
1. Be sure to unplug the power cord when the Hand Mixer is not in
use. Make sure the Speed Control Lever is in the OFF position.
2. Attach Beaters or Dough Hooks. (See ATTACHING BEATERS/
DOUGH HOOKS.)
3. Plug the cord into a 120V AC electrical outlet.
4. Place Beaters directly into container holding ingredients to be mixed.
5. Turn LO/HI Dial to set the Mixer to operate LO or HI. Select the
speed setting that matches your mixing task. (See “SPEED
SETTINGS” for more information.) Mix ingredients to desired
consistency. Press the Turbo Boost Button from any setting, to give
the Mixer a short spurt of mixing action.
6. After you have finished mixing, turn the Speed Control Lever to
OFF and unplug the appliance.
7. Raise the Mixer Head and press down on the Beater Eject Button
to eject the Beaters or Dough Hooks.
8. Scrape excess batter off the Beaters using a rubber or plastic
spatula. DO NOT strike Beaters or Dough Hooks on the rim of
the bowl.This could damage the Attachments.
SPEED SETTINGS
Your Hand Mixer has 10 different speed settings. With the LO/HI
Speed Dial turned to the LO position, every time you adjust the
Speed Control Lever, you are accessing Speeds 1 - 5. With the LO/HI
Speed Dial turned to the HI position, every time you adjust the Speed
Control Lever, you are accessing Speeds 6 - 10.
PLEASE NOTE that the Turbo Boost feature can be used at ANY speed
setting by depressing the Turbo Boost Button. Resume previously
selected speed by releasing Turbo Boost Button.
NOTE: DO NOT use Turbo Boost feature for more
than 2 minutes at a time as the Motor may overheat and
damage the Mixer.
5