Status leds, Status leds -4 – SMC Networks 48-Port User Manual
Page 18
A
BOUT
THE
T
IGER
S
WITCH
10/100
1-4
Status LEDs
The LEDs, which are located on the front panel for easy viewing,
are shown below and described in the following table.
Port and System Status LEDs
LED
Condition
Status
Power
On
Switch is receiving power.
RDP
On
Redundant power is on, and the RPU is in
backup or active mode.
Off
Redundant power is off or has failed.
Mgmt
On
Agent is operational.
RJ-45 Ports
Link
On Amber
Port has established a valid 10 Mbps
connection.
On Green
Port has established a valid 100 Mbps
connection.
Flashing
Port has been partitioned due to an
abnormal network condition, or manually
disabled.
Act*
On
Traffic is passing through the port.
FDX*
On
Port is operating at full duplex.
Off
Port is operating at half duplex.
FC*
On
Flow control enabled.
* Use the Mode Select button to select the LED display mode.