Sanyo DVD-DX405 - Manual (Page 17)

16
BASIC OPERATIONS
SYSTEM SETTING
V-MODE (WHEN SELECTING INTERLACE or PROGRESSIVE)
• When you press the [SYSTEM] button, the TV screen shows
the information as : “If you want to change, press
[SYSTEM] again.” Press the [SYSTEM] button again, the
video out system changes as follows.
According to the system of the TV to be connected, set the system of the unit to
make it match the TV.
Press SYSTEM button on the remote control, then choose TV TYPE.
SYSTEM
V-MODE
• When connecting to your TV's component video inputs, press
the V-MODE on the remote control to select INTERLACE or
PROGRESSIVE.
When you press the [V-MODE] button, the TV screen shows the
information as : “If you want to change, press [V-MODE] again.”
Press the [V-MODE] button again to change the video mode.
If you connect to Composite (basic A/V) inputs after
selecting one of the 2 above option, picture is not
displayed. Press the V-MODE on the remote control to
select Composite video.
DISPLAY
Each time you press the “DISPLAY” button when playing a disc, the TV screen shows
the information as :
Title Elapsed ➝ Title Remain ➝ Chapter Elapsed ➝
Chapter Remain ➝ Display Off
DISPLAY
Single Elapsed ➝ Single Remain ➝ Total Elapsed ➝ Total Remain ➝ Display Off
Folder
DVD
CD
MP3
PAL AUTO NTSC
DVD-DX405(K501)CA (GB) 2006.6.19 1:24 PM ˘ ` 16