Sanyo DVD-DX405 - Manual (Page 38)

37
OTHERS
TROUBLESHOOTING
If you experience the following problems while using the unit, this
troubleshooting guide can help you.
• NO SOUND
- Check if the unit is connected securely.
- Make sure you operate the TV or amplifier correctly.
• NO IMAGE , IMAGE ROLLS AND NO COLOR
- Check if the unit is connected securely.
- Make sure you operate the TV correctly.
- Make sure you set the color system correctly.
• DISC CAN NOT BE PLAYED
- There is no disc in the unit.
- Insert the disc on the disc tray properly with the label side up.
- Clean the disc.
- Moisture has condensed in the unit.
Remove the disc and leave the unit on for about one hour.
• REMOTE CONTROL DOES NOT WORK
- Remove barriers between the remote control and the unit.
- Replace the batteries with new ones.
- Point the remote control at the remote control sensor of the unit.
• ATTENTION: KEEPING THE STATUS OF STOP MORE THAN 5 MINUTES ENTERS
SCREEN SAVE MODE. WHEN THE SCREEN SAVE MODE IS KEPT
MORE THAN AN HOUR, THE SET ENTERS STAND-BY MODE.
DVD-DX405(K501)CA (GB) 2006.6.19 1:24 PM ˘ ` 37